Beurer PO-30 Pulse Oximeter

The Beurer PO-30 is a compact, CE-certified fingertip pulse oximeter designed for fast, non-invasive monitoring of arterial oxygen saturation (SpO2) and heart rate (pulse rate) at home, during travel, and at high altitude. Using two wavelengths of light — red (660 nm) and infrared (880 nm) — it measures SpO2 within the 0–100% range with an accuracy of ±2% in the clinically relevant 70–100% range, and pulse rate across 30–250 beats per minute with ±2 bpm accuracy. The entire measurement takes only seconds.

The bright colour display offers four viewing orientations and adjustable brightness — allowing clear readability from any angle and in any ambient lighting. A real-time pulse bar graph is shown alongside the numeric SpO2 and heart rate values, providing immediate visual confirmation of signal quality. At just 61 × 36 × 32 mm and approximately 57 g, the PO-30 is genuinely pocket-sized. The included lanyard and belt pouch make it easy to carry during sports, travel, or outdoor activity. Auto shut-off conserves battery, and a low battery indicator gives advance warning before power runs out. CE certified as a medical device. 5-year Beurer warranty. 2 × 1.5V AAA batteries included. Available in Pakistan at Jarahi.

Why Choose Beurer Pulse Oximeter

• SpO2 Measurement (0–100%, ±2% accuracy): Non-invasive arterial oxygen saturation reading from the fingertip. Accuracy of ±2% is confirmed for the 70–100% range — the clinically relevant range for monitoring respiratory health.
• Heart Rate / Pulse (30–250 bpm, ±2 bpm accuracy): Pulse rate measured simultaneously with SpO2 — covers the full physiological range from resting bradycardia to peak exercise.
• Colour Display with 4 Viewing Orientations: Rotate the display to any of 4 positions for comfortable reading regardless of how you hold the device.
• Adjustable Brightness: Adapt the display brightness to your ambient environment — bright outdoors or dimmed in a dark room.
• Real-Time Pulse Graphic: Live bar graph displayed alongside numeric values — provides visual confirmation that the device has a strong, stable signal before accepting a reading.
• Ultra-Compact and Lightweight: 61 × 36 × 32 mm, approx. 57 g — genuinely pocket-sized for everyday carry.
• Suitable for High-Altitude Sports: Specifically designed for use in low-oxygen environments — trekkers, mountaineers, skiers, and altitude athletes can monitor SpO2 during activity.
• Suitable for Respiratory Condition Monitoring: Particularly recommended for individuals with COPD, bronchial asthma, heart failure, and other conditions where SpO2 monitoring is beneficial.
• Lanyard and Belt Pouch Included: For secure, convenient carry during outdoor activity or travel.
• Auto Shut-Off and Low Battery Indicator.
• CE Medical Device Certified. 5-Year Beurer Warranty.
• 2 × 1.5V AAA Batteries Included.

Product Specifications

Usage Instructions

1. Insert 2 × AAA batteries into the battery compartment.
2. Insert your index or middle finger fully into the clip sensor — the fingertip should touch the far end of the slot. The finger should be 10–20 mm wide and 5–15 mm thick for reliable measurement.
3. The device powers on automatically when the finger is inserted and begins measuring.
4. Hold still with the hand relaxed — movement during measurement causes inaccurate readings. The reading stabilises within a few seconds.
5. Read the SpO2 percentage and pulse rate on the colour display. Check the pulse bar graph — a stable, consistent graphic confirms a good signal quality.
6. Rotate the display to your preferred orientation using the display orientation button if needed.
7. Remove your finger when done — the device powers off automatically after a short delay.
8. Do not use continuously on one finger for longer than approximately 2 hours — rotate to a different finger if extended monitoring is needed.

Care and Storage Instructions

• Wipe the exterior of the oximeter clean with a soft, slightly damp cloth. A small amount of mild cleaning solution can be used if needed.
• Never hold under running water or submerge — the device is not waterproof. Do not use high-pressure sterilisation.
• Store in a dry place with relative humidity ≤95%. Ambient storage temperature should remain between -40°C and 60°C.
• Store in the belt pouch when not in use to protect from dust and impact.
• If the device will not be used for an extended period, remove the batteries to prevent leakage damage.
• Repairs must only be carried out by Beurer Customer Services or authorised service centres.

Warnings and Precautions

• For monitoring and wellness purposes only — not intended for medical diagnosis. Consult a healthcare professional for medical interpretation of readings.
• Nail polish, gel nails, false nails, or dark nail pigmentation on the measurement finger will prevent accurate SpO2 measurement — remove nail varnish or use a different finger without polish.
• Remain still during measurement — hand, arm, or body movement causes inaccurate or failed readings.
• Insufficient circulation in the measurement finger (e.g. from cold hands or low blood pressure) can prevent a successful reading — warm the hand or try a different finger.
• Do not use continuously on one finger for longer than approximately 2 hours.
• If SpO2 consistently reads below 95%, consult a healthcare professional promptly.
• The PO-30 is not suitable for continuous monitoring — it provides spot-check measurements only. For overnight or extended monitoring, the Beurer PO-80 is available.
• Electromagnetic disturbances may limit device performance in some environments.
• Keep out of reach of children.
• Do not press buttons with pointed or sharp objects.

Package Contents

• 1 × Beurer PO-30 Pulse Oximeter
• 1 × Lanyard (strap)
• 1 × Belt Pouch
• 2 × 1.5V AAA Batteries (included)
• 1 × Instruction Manual

Frequently Asked Questions