Test Strips – Medisign MM-800 Auto Blood Glucose Meter – 50 Strips

Medisign MM-800 Blood Glucose Test Strips are designed for use exclusively with the Medisign MM-800 Auto Blood Glucose Meter. Using glucose oxidase enzyme technology, each strip reacts with a small capillary whole blood sample to produce an accurate blood glucose reading in 5 seconds — with no manual coding required.

Each strip requires only 0.5 µL of blood, minimising discomfort during finger-prick sampling. The strips are stored in a sealed vial and must be used within 3 months of opening. Once inserted into the MM-800 meter, the strip is automatically recognised and the test begins without any calibration step from the user.

This pack contains 50 test strips, suitable for approximately one to two months of daily monitoring depending on testing frequency.

Why Choose Medisign Test Strips

• Compatible with Medisign MM-800: Designed exclusively for use with the Medisign MM-800 Auto Blood Glucose Meter.
• No Coding Required: Auto-coding — no manual chip or code entry needed. Insert and test.
• Glucose Oxidase Technology: Precise enzyme-based amperometric testing for reliable results.
• Minimal Sample Size: Requires only 0.5 µL of capillary whole blood.
• Fast 5-Second Results: Blood glucose reading delivered in 5 seconds.
• Wide Measuring Range: 20 to 600 mg/dL — suitable for monitoring both low and high glucose levels.
• Single Use: Each strip is for one-time use only, ensuring hygiene and accuracy.
• Sealed Vial Storage: Strips are stored in a sealed vial to protect from moisture and contamination.
• Pack of 50: Economical supply for regular daily testing.

Product Specifications

Usage Instructions

1. Wash and dry hands thoroughly before testing.
2. Open the vial and remove one test strip. Reseal the cap immediately.
3. Insert the strip into the Medisign MM-800 meter — the meter will power on automatically.
4. Use a lancing device to obtain a small blood sample (0.5 µL) from the fingertip.
5. Touch the sample end of the test strip to the edge of the blood drop. The strip draws in the sample by capillary action.
6. Wait 5 seconds for the blood glucose reading to appear on the meter display.
7. Record your result if needed. Use the meter’s strip ejector to dispose of the used strip hygienically.
8. Refer to the MM-800 meter user manual for full guidance.

Storage Instructions

• Store in the original sealed vial at 4°C to 30°C in a cool, dry place.
• Keep away from direct sunlight, heat, and humidity.
• Do not refrigerate or freeze.
• Always reseal the vial cap tightly after removing a strip.
• Once opened, use all strips within 3 months. Note the opening date on the vial label.
• Keep out of reach of children.

Warnings and Precautions

• For in vitro diagnostic use only — external blood glucose testing only.
• For single use only. Do not reuse strips — reuse causes inaccurate results.
• Compatible only with the Medisign MM-800 meter. Do not use with other meters.
• Do not use strips after the expiry date on the vial or packaging.
• Do not use strips from a damaged or previously opened vial.
• Consult a healthcare professional before making treatment decisions based on blood glucose readings.
• Keep out of reach of children.

Package Contents

• 50 × Medisign MM-800 Blood Glucose Test Strips
• Sealed vial with cap

Frequently Asked Questions